Product Name: silver copper conductive paint
Product Code: CC-3002
;Packaging specifications:
4kg/ tank
Products: a variety of organic polymer coatings
paint viscosity: 120± 3sec/25℃
1.3± weight: 0.05
Solid content: 32± 1%
Theoretical coverage: 8-10 ㎡/kg ( film thickness =20μ m )
technical parametersThe conductive effect: ≤ 0.15Ω /cm ( film thickness of many 20μ m )
Recommended thickness: ≥ 20μ m
Test conditions:
the film completely dries to test resistance, with the digital resistance instrument to measure, in order to avoid the error, should be in equal distance under constant pressure measurement, while ensuring a uniform thickness .
Electromagnetic noise attenuation of 40-80dB
says:
use
The use of material: this series of products to adapt to ABS, HIPS, PS, PC and other pieces of plastic
Dilute release agent: ethanol ( more than 95%)
Dilution ratio: 1:0.5-0.7 ( weight ratio of
)Drying conditions: surface dry time is 10 minutes, the drying time is 65± 5℃ /30±
10 minutes
Construction technology of
( follow the instructions below to implement operation of
)In 1, after opening to mechanical stirring, the bottom sediment is uniformly dispersed, and then transferred to the paint bucket.
2, must have 95% or more content of ethanol, according to the above provides the dilution ratio, poured into the original packaging barrel, rinse after use more than paint paint.
3, strong mechanical stirring 10-15 minutes, achieved paint uniformly mixed dispersion. If there is no machinery with manual mixing, please fully mixed and dispersed to confirm no coarse particles, uniform fine moist.
4, if the pump for spray paint, please be sure to pump with slow stirring device, stirring spraying, so as to achieve uniform settlement prevention.
5, if a single spray gun cup, please in each loading oil, first will fill in the paint bucket working fluid mixing evenly divided into a gun spraying cup, without stirring.
In 6, according to the workpiece type body frame and the resistance value requires the implementation of spraying, coating uniformity, the film thickness to achieve the product standards, avoid over spray or drain spout. The connecting section of small place should adjust the spraying pressure and fuel quantity.
7, according to the need, the product can be further diluted, but need to add the company designed with thickener. Of course, we do not claim to do so, please customers according to the resistance or cost requires appropriate selection.
Cleaning of tools:
all tools must be cleaned as soon as possible with ethanol.
protective measures during use, to ensure that the work environment: good ventilation, to avoid long-term direct contact or inhalation, not the paint into the drains or sewage pollution of the environment.
storage / shelf life: sealed and stored in ventilated, dry indoor environment. 6 months ( intact )
/25℃
